Sterile pneumatic directional valve

application

This directional valve is used to switch the material flow in equipment pipelines and is widely used in industries such as food, brewing, beverages, dairy products, toothpaste, cosmetics, biopharmaceuticals, etc.

technical parameter

◆ Specification: 1"~ 2.5"

Connection method: welding, clamp, thread

Maximum working pressure: ≤ 6bar

◆ Supply compressed air: 4-6 bar

◆ Compressed air connection: Air pipe connector G1/8"

Working temperature: -10 ℃ to 150 ℃

◆ Part in contact with materials: SS304/SS316L

◆ Internal surface contact product: Ra ≤ 0.4 μ M

◆ Sealing element: PTFE+(EPDM+SI+FPM)

◆ Proximity switch: 6-36V DC 2 NPN or PNP (optional)

Input power supply: 24V DC

operational principle

The upper and lower valve cores are separated by an intermediate diaphragm type seal, which uses compressed air to push the piston inside the pneumatic actuator up. The piston rod is connected to the valve core. At the same time, when the air compression pushes the piston inside the pneumatic actuator up, it also pulls the valve stem up, causing the sealing surface on the valve seat to press against the sealing plane of the upper valve body, thus closing the connection of the upper valve port. When the air compression is lower than the spring force or there is no gas compression, the piston is pushed down by the spring and drives the valve stem to move down, closing the lower valve port. Mainly used for fluid switching in pipeline systems, with one in and two out switching. It is applied in pipeline systems that do not contain pollution or mixed materials.